Havoc Roar HRS-RK-1100.6-LE Lowers Edition
Surround Road King Stereo System

1998–2025 Harley-Davidson Road King

6 SPEAKERS | 1,100W NEO | LOWERS EDITION | CHROME OR BLACK

OUR MOST POWERFUL ROAD KING SYSTEM — BUILT FOR YOUR LOWERS

BUILT AS ONE SYSTEM. ENGINEERED FOR ONE MOTORCYCLE.

The Havoc Roar HRS-RK-1100.6-LE Lowers Edition is a purpose-built, six-speaker, 1,100W surround audio system for 1998–2025 Harley-Davidson Road King motorcycles equipped with compatible lower fairings.

At the center is the Aquatic AV GP1 gauge stereo, installed into a Havoc billet Road King nacelle cap matched to your selected model-year configuration. The system runs as three stages:

• Handlebars: a pair of Havoc 3.5" billet handlebar speakers, built by Aquatic AV exclusively for Havoc, driven directly by the GP1's internal amplifier.
• Lowers: a pair of Aquatic AV HS116 6.5" 480W NEO speakers, installed in your lower fairing speaker pods.
• Saddlebags: a pair of Aquatic AV HS118 6x9" 480W NEO speakers, installed in the saddlebag lids.

Both NEO stages are powered by a dedicated Aquatic AV AD1200.4 four-channel amplifier, one channel per speaker, mounted inside the saddlebag on the Havoc Road-Lock amplifier bracket.

1,100W • 6 SPEAKERS • 3 STAGES

CHOOSE YOUR FINISH

CHROME

Real chrome — triple plated copper, zinc and chrome — for the classic bright-metal look that complements polished and chrome components throughout the bike.

BLACK POWDERCOAT

Chosen to complement the darker factory trim of the Road King Special and other blacked-out builds.

Finish selection applies to the Havoc nacelle cap and handlebar speaker enclosures. Lower fairing speaker pods and grilles are customer supplied.

AQUATIC AV GP1 — THE CONTROL CENTER

Rather than hanging a universal stereo from the handlebars or adding an upper fairing, Havoc integrates the Aquatic AV GP1 gauge stereo directly into a purpose-built billet Road King nacelle cap, supplied pre-installed and matched to the selected model year.

• Bluetooth audio streaming
• AM/FM radio
• USB connectivity and device charging
• MP3 playback and AUX input
• RCA pre-out for external amplification
• 288W maximum internal amplifier power
• Class A/B amplifier, 2-ohm stable
• Monochrome TFT display with blue backlight
• Rotary control and physical buttons
• IP65 water-resistant construction

STAGE 1 — 3.5" HAVOC HANDLEBAR SPEAKERS

The handlebar stage puts sound closest to the rider. The Havoc 3.5" handlebar speakers are waterproof units built by Aquatic AV exclusively for Havoc Motorcycles, using ST-3J10 SB high-output 89mm drivers with large 35.5mm voice coils.

They are factory tuned with Nichicon Muse premium audio high-pass filters set at 241Hz, keeping damaging low bass away from the 3.5" drivers so they deliver clear vocals and detail that cut through wind and engine noise.

STAGE 2 — HS116 6.5" NEO IN YOUR LOWERS

The main front stage uses two Aquatic AV HS116 480W NEO speakers, installed in compatible speaker pods in your motorcycle's lower fairings. There are many factory and aftermarket lower fairing systems, with different pod shapes, mounting arrangements and grille designs. Rather than supply a pod that may not fit your motorcycle, we leave the choice of pods and grilles to you.

STAGE 3 — HS118 NEO 6x9" SADDLEBAG SPEAKERS

The rear stage completes the surround field with a pair of Aquatic AV HS118 NEO 6x9" saddlebag speakers, Aquatic AV's top-tier neodymium 2-way coaxial saddlebag speaker.

• Full-range 2-way coaxial, 1" tweeter
• 480W max / 240W RMS per pair, 4 ohm
• 90 dB sensitivity, 20 Hz – 20 kHz response
• Neodymium N38H woofer and tweeter magnets
• Glass-fibre cone, Santoprene surround
• IP44 water resistant
• 86.5 mm (3.4") mounting depth

AQUATIC AV AD1200.4 — 1,200W OF DEDICATED POWER

Four NEO speakers need serious power. The Aquatic AV AD1200.4 gives each of them its own channel: channels 1-2 drive the HS116 lowers pair and channels 3-4 drive the HS118 saddlebag pair.

• Class D four-channel amplifier
• Up to 1,200W max power (output varies by impedance and configuration)
• RCA low-level and high-level (speaker) inputs
• 2-ohm and 4-ohm stable
• Electronic crossover
• IP67 waterproof, UV, salt and fog resistant

ROAD-LOCK SADDLEBAG AMPLIFIER MOUNT

The AD1200.4 is installed using the Havoc Road-Lock saddlebag amplifier bracket, CNC-bent and laser-cut from 14-gauge steel and pre-drilled for the AD1200.4 footprint. Integrated cable management keeps power, signal, trigger and speaker wiring organized at the top of the mount, and the Havoc logo cutout opens airflow behind the amplifier.

COMPLETE MEANS COMPLETE — FOR THE AUDIO SYSTEM

The system connects to power and ground at the battery using the supplied harnessing, sized for the AD1200.4's current draw. No cutting into the factory Harley-Davidson wiring harness is required, and an inline on/off switch is included to avoid unnecessary battery drain.

FITMENT

Designed for Road King models retaining the stock-style headlight nacelle and stock-style hard saddlebags, equipped with lower fairings capable of accepting suitable 6.5" speaker pods, and without a gauge or tach already mounted on the nacelle cap.

• Handlebar speakers: fit bars that use the factory clamp. Not compatible with T-bars.
• Lower fairing speakers: require customer-supplied pods and grilles compatible with the HS116.
• Saddlebag speakers: require cutting the stock saddlebag lids.

WHO IS THE 1100.6-LE FOR?

• Riders with lowers who want full surround sound: detail at the bars, power up front, and fill from the saddlebags
• Loud pipes, fast riding and long highway days, with a passenger who wants to hear the music too
• NEO drivers and dedicated amplifier channels on every main speaker
• Riders who would rather choose pods that fit their lowers than pay for highway bar pods they do not need