Havoc Roar HRS-RK-1100.6 Surround Road King Stereo System

1998-2025 Harley-Davidson Road King

6 Speakers | 1,100W NEO | Chrome or Black

OUR MOST POWERFUL ROAD KING SYSTEM

BUILT AS ONE SYSTEM. ENGINEERED FOR ONE MOTORCYCLE.

The Havoc Roar HRS-RK-1100.6 is a purpose-built, six-speaker, 1,100W surround audio system engineered specifically for 1998-2025 Harley-Davidson Road King motorcycles.

Choose the configuration that matches your motorcycle: 1998-2013 or 2014-2025, and select either Chrome or Black finish.

At the center of the system is the Aquatic AV GP1 gauge stereo, installed into a Havoc billet Road King nacelle cap. Each model-year configuration uses the correct purpose-built nacelle cap for that generation.

The system runs as three stages:

• Handlebars: a pair of Havoc 3.5" billet handlebar speakers, built by Aquatic AV exclusively for Havoc, driven directly by the GP1's internal amplifier.
• Highway bar: a pair of 6.5" Havoc Roar highway bar pods loaded with Aquatic AV HS116 480W NEO speakers.
• Saddlebags: a pair of Aquatic AV HS118 480W NEO 6x9" speakers installed in the saddlebag lids.

Both NEO stages are powered by a dedicated Aquatic AV AD1200.4 four-channel amplifier, one channel per speaker, mounted inside the saddlebag on the Havoc Road-Lock amplifier bracket.

Every speaker has a job. Every speaker has dedicated power. Everything is included.

1,100W • 6 SPEAKERS • 3 STAGES

CHOOSE YOUR FINISH

CHROME

For riders who want the classic bright-metal look of chrome, the Chrome configuration is real chrome - triple plated copper, zinc and chrome - and gives the Havoc Roar system a traditional custom-motorcycle appearance that complements polished and chrome components throughout the bike.

BLACK POWDERCOAT

The Black powder coat finish was chosen specifically for riders who want the stereo installation to complement the darker factory appearance of the motorcycle.

The finish closely complements the factory black trim found on the Road King Special, allowing the Havoc nacelle, handlebar and highway bar components to visually integrate with the motorcycle rather than becoming a contrasting feature.

AQUATIC AV GP1 — THE CONTROL CENTER

The system starts where the rider interacts with it: the Aquatic AV GP1 gauge stereo.

Rather than hanging a universal stereo from the handlebars or adding a fairing, Havoc integrates the GP1 directly into a purpose-built billet Road King nacelle cap, supplied pre-installed and matched to the selected model year.

• Bluetooth audio streaming
• AM/FM radio
• USB connectivity and device charging
• SiriusXM app audio through your connected device
• MP3 playback
• AUX input
• RCA pre-out for external amplification
• 288W maximum internal amplifier power
• Class A/B amplifier, 2-ohm stable
• Monochrome TFT display with blue backlight
• Rotary control and physical buttons
• IP65 water-resistant construction

STAGE 1 — 3.5" HAVOC HANDLEBAR SPEAKERS

The handlebar stage puts sound closest to the rider. The Havoc 3.5" handlebar speakers are waterproof units built by Aquatic AV exclusively for Havoc Motorcycles, using ST-3J10 SB high-output 89mm drivers with large 35.5mm voice coils.

They are factory tuned with Nichicon Muse premium audio high-pass filters set at 241Hz, keeping damaging low bass away from the 3.5" drivers so they can do what they do best: clear vocals and detail that cut through wind and engine noise.

STAGE 2 — 6.5" HIGHWAY BAR PODS WITH HS116 NEO

The main front stage is a pair of Havoc Roar 6.5" CNC-machined aluminum speaker pods, each loaded with an Aquatic AV HS116 480W NEO speaker and aimed toward the rider for clarity at speed.

The Havoc enclosure is designed around the 6.5" speaker, with a rigid aluminum construction and approximately 2.0-litre internal cavity. The mounting system provides direct fitment for 1-1/2" bars and includes billet shims for 1-1/4" bars.

STAGE 3 — HS118 NEO 6x9" SADDLEBAG SPEAKERS

The rear stage completes the surround field with a pair of Aquatic AV HS118 NEO 6x9" saddlebag speakers, Aquatic AV's top-tier neodymium 2-way coaxial saddlebag speaker.

• Full-range 2-way coaxial, 1" tweeter
• 480W max / 240W RMS per pair, 4 ohm
• 90 dB sensitivity, 20 Hz – 20 kHz response
• Neodymium N38H woofer and tweeter magnets
• Glass-fibre cone, Santoprene surround
• IP44 water resistant
• 86.5 mm (3.4") mounting depth

AQUATIC AV AD1200.4 — 1,200W OF DEDICATED POWER

Four NEO speakers need serious power. The Aquatic AV AD1200.4 gives each of them its own channel: channels 1-2 drive the HS116 highway bar pair and channels 3-4 drive the HS118 saddlebag pair.

• Class D (digital) four-channel amplifier
• Up to 1,200W max power (output varies by impedance and configuration)
• RCA low-level and high-level (speaker) inputs
• 2-ohm and 4-ohm stable
• Electronic crossover
• IP67 waterproof, UV, salt and fog resistant

ROAD-LOCK SADDLEBAG AMPLIFIER MOUNT

The AD1200.4 is installed using the Havoc Road-Lock saddlebag amplifier bracket, CNC-bent and laser-cut from 14-gauge steel and pre-drilled for the AD1200.4 footprint.

The bracket incorporates integrated cable management, keeping power, signal, trigger and speaker wiring organized at the top of the mount, and the Havoc logo cutout opens airflow behind the amplifier for heat management.

COMPLETE MEANS COMPLETE

One of the biggest problems with building motorcycle audio from individual components is discovering halfway through the installation that something doesn't connect, something doesn't mount, or another component is required to make the system work.

That's not how Havoc Roar systems are designed.

The system connects to power and ground at the battery using the supplied harnessing, sized for the AD1200.4's current draw. No cutting into the factory Harley-Davidson wiring harness is required, and an inline on/off switch is included so the system can be switched off to avoid unnecessary battery drain.

FITMENT

Designed for Road King models retaining the stock-style headlight nacelle and stock-style hard saddlebags, including applicable Road King, Road King Classic and Road King Special configurations that do not already have a gauge or tach mounted on the nacelle cap.

• Handlebar speakers: fit bars that use the factory clamp. Not compatible with T-bars.
• Highway bar pods: fit 1-1/2" bars directly, with billet shims included for 1-1/4" bars. A sufficient straight section of bar is required for proper mounting.
• Saddlebag speakers: require cutting the stock saddlebag lids.

WHO IS THE 1100.6 FOR?

• Riders who want full surround sound: detail at the bars, power up front, and fill from the saddlebags
• Loud pipes, fast riding and long highway days, with a passenger who wants to hear the music too
• NEO drivers and dedicated amplifier channels on every main speaker
• A clean, classic Road King silhouette with no fairing